10mm Chrome Coving
The 10mm chrome coving trim is designed to fit the 10mm shower panels. Each trim is supplied at a standard length of 2.4m. First, the dimensions of the bathroom walls where the coving is being installed should be measured accurately. If the length of the walls is more than 2400mm, more than one length may be required. It is advisable to add 5% to the measured length while determining the total length of coving required, since there may be some wastage while cutting the coving for each wall.
Fitting the plastic coving on the bathroom ceiling:
It is advisable to use a saw or knife which is sharp for cutting the coving quickly and accurately. If the coving is being installed on all the walls of the bathroom, the ends should be cut at an angle of 45 degrees, so that they will fit together properly. A mitre can be used for cutting at an angle. After this, it is advisable to use the silicon adhesive we supply, to the flat surfaces of the coving, so that it can stick on the bathroom wall and ceiling. Screws can also be used for fixed, yet adhesive is recommended since it will seal any gap. The wall and ceiling panels will align perfectly with the coving to form a smooth curve. Since the chrome coving is made from PVC, it will not be spoiled or affected by the water in the bathroom.
Home Delivery (England & Wales) available
Collection (South Wales) available from:
Unit 22-23 Aberaman Enterprise Centre, Aberdare, CF44 6DA, United Kingdom.
We offer up to three free samples per customer on all bathroom/shower panels and flooring products. If you would like to take advance of this service, please fill out our Request Form.