End Trim for AquaGuard Slat Wall Panels

Add the perfect finishing touch to your slat wall installation with our End Trim for our AquaGuard Slat Wall Panels. Designed to neatly frame the left side of your feature wall, this trim ensures a smooth, professional look with no exposed panel edges.

Made to match the full AquaGuard Slat Panel range, it’s easy to install and crafted from the same durable, water-resistant material – giving you both style and performance. Whether you're updating a single wall or completing a full room, this trim helps tie everything together beautifully.

Ideal for DIY and trade projects alike, it adds that final touch of polish.

Please Note: These trims are splash-proof, not fully waterproof. Not recommended for use inside shower enclosures or areas with direct, continuous water contact.

Pre-installation Advice:

• Please inspect all items following your delivery to ensure they meet your expectations. Any damages, defects, or returns, must be reported within 14 days of delivery.
• Prior to installation all panels must be stored flat, resting on a surface that supports the entirety of the panel to prevent any bowing. Do not store externally; the area must be dry with low humidity levels.
• This product is not intended for outdoor installations.

For Aquaguard Panels (Polystyrene Composite)

CRITICAL - Do NOT use screws:

• Aquaguard panels are made from Polystyrene Composite (PS) material and DO NOT have back felt padding.
• Polystyrene Composite (PS) is a rigid but brittle material that is fundamentally incompatible with screw fastening.
• Using screws will cause the panels to crack and split. The rigid PS material cannot accommodate the stress and pressure points created by screw installation.
• Screws are NOT suitable for Aquaguard panels under any circumstances.
• Aquaguard panels must be installed using adhesive methods only.

Installation Method for Aquaguard Panels:

• Adhesive Installation (Required): Use Easy Panels High Strength Cladding Adhesive with a caulking gun. Apply adhesive to the back of the panel and press firmly onto your wall surface. This method distributes pressure evenly across the Polystyrene Composite material, preventing cracking.
• Ensure the wall surface is clean, dry, and properly prepared before application.
• Allow adequate curing time as per adhesive instructions before exposing panels to moisture or stress.
• Aquaguard panels are suitable for areas with moisture exposure, including kitchens and bathrooms, making them ideal for wet environments where acoustic panels cannot be used.

General Pre-installation Advice (All Products):

• Measure your space carefully and plan your layout before beginning installation.
• Ensure walls are clean, dry, and level for best results.
• All measurements provided are approximate.
• Please read the fitting instructions in their entirety before installing the product.

All panels must be stored flat in a dry area prior to installation.

To keep your panels looking great, use a soft and dry lint-free cloth that will preventing scratches while capturing dust particles. A telescopic duster can also be used to manage those hard-to-reach areas! Avoid using rough materials or any moisture on the panels. If preferred, you can vacuum the recess between the slats using a slim end attachment to capture the nooks where dust tends to accumulate.

• Pencil
• Tape measure
• Spirit level
• A fine-toothed handsaw
• Stanley knife
• Protective mask and safety glasses
• High-grab adhesive and caulking gun

Home Delivery (England & Wales) available

or

Collection (South Wales) available from:

Address: Easy Panels, Robertstown Industrial Estate, Wellington Street, Aberdare, CF44 8HD.

Please note: For sat nav directions, please use the postcode CF44 8EZ.

Find us: Google Maps or What3Words.

Click here to view our Delivery Policy

While we don’t offer samples for any of the trims on our website, we can provide samples of the panels. If you would like to order a sample of our Aquaguard Wall Panels, please click here.

• Panel colours may vary between batches due to manufacturing and procurement processes.
• Please ensure you purchase enough panels for your project. We cannot guarantee to match batches between different orders. If you require an exact match, please keep a note of the batch numbers that appear on your packaging so we can check availability and try our best to assist you.
• All measurements provided are approximate.
• PVC panels are classified as building materials and by default are not supplied with edge-to-edge printing along the top and bottom of the panel. You will need to cut the panel to size, eliminating the corrugated edges at either end. This is not a manufacturing defect. An allowance of up to 20mm is required to accommodate this process.
• Please read the fitting instructions in their entirety before installing the product.
• Product images are for illustrative purposes only and may differ slightly from the actual product.
• PVC panels must not be exposed to UV light, both direct and indirect sunlight.
• Always store products flat, resting them on a surface that supports the entirety of product to prevent any bowing.
• Profiles and joint trims are sold separately.
• We strongly recommend that you do not book a fitter or tradesperson until you have received your delivery and are happy with your order. We cannot be held responsible for any third-party costs or charges incurred due to non-delivery of an order, or orders that have not been checked following delivery.
• All deliveries require someone present to sign for and take receipt of the goods. We will not leave goods in a ‘safe place’ without express prior consent.