3.6M Brown Composite Decking Board - New

Our Brown Composite Decking Boards blend the timeless appeal of natural timber with the strength and simplicity of modern composite engineering. Designed to stay looking great with minimal effort, this decking delivers long‑lasting performance in all weather conditions.

Crafted from a resilient wood–plastic composite, it naturally resists rot, warping, cracking, fading and splintering – so you can enjoy your outdoor space without regular staining or sealing. The reversible finish offers two distinct looks: a natural woodgrain texture for warmth and style, or a grooved anti‑slip surface for extra safety and practicality. Its durable design is ideal for garden patios, terraces and outdoor living areas, delivering low‑maintenance results that stand the test of time.

Each board measures 3.6m in length, 148mm in width and 25mm in thickness.

Key Features

• Natural Brown for a classic, natural finish – complements any outdoor space, adding a stylish, up-to-date look.
• Dual-sided design with woodgrain and anti-slip slatted surfaces – choose a warm, natural timber effect or a practical grooved side for safety.
• Weather-resistant and long-lasting – engineered to withstand rain, sun and UK seasonal changes without fading or damage.
• No rot, warping, cracking or splinters – a safer, more reliable alternative to traditional timber decking.
• Minimal upkeep required – no painting, staining or sealing, so your decking stays looking great year after year.
• Perfect for patios, decking and garden upgrades – versatile enough for any outdoor project, big or small.
• Backed by reliable performance and peace of mind – built to last, giving you confidence in every board you lay

To complete your Easy Decking installation for a seamless look, you also need:

• Brown End Caps
• Brown Angle Trims
• Brown Step Boards
• Brown Step End Caps
• Brown Edging Trims
• Clips & Fixings

• Tape measure
• Spirit level
• Carpenter’s square
• Rubber mallet
• Pencil
• Drill/driver + stainless-steel screws
• Pack of spacers (3–6mm)
• Circular saw or mitre saw (fine-tooth blade recommended)
• Chalk line
• Protective mask and safety glasses

BEFORE YOU START

Understand How Composite Decking Works

Composite boards expand and contract slightly with temperature changes.
Your installation must account for this movement — with gaps, spacing, and correct fixing.

What’s Included in this Guide

This guide covers installing:

• Deck Boards (main surface)
• Edging Trim (fascia)
• Step Boards (bullnose)
• Corner Angle Trim
• Deck End Caps
• Step End Caps

Tools You’ll Need

• Tape measure
• Spirit level
• Carpenter’s square
• Rubber mallet
• Pencil
• Drill/driver + stainless-steel screws
• Pack of spacers (3–6mm)
• Circular saw or mitre saw (fine-tooth blade recommended)
• Chalk line
• Protective mask and safety glasses

Acclimatisation

Leave boards outside for 24–48 hours in the area they will be installed. This reduces movement once installed.

BUILDING THE SUBFRAME (THE MOST IMPORTANT PART)

Composite decking is only as strong as the structure beneath it.

Suitable Subframe Materials

• Pressure-treated timber (common & affordable)
• Composite joists
• Aluminium joists (premium option)
  

Ground Preparation

If installing over soil or grass, follow these steps:

1. Remove all vegetation.
2. Lay a weed control membrane.
3. Add gravel/hardcore for drainage.
4. Place support pads or concrete blocks at intervals to sit your joists on.
   

Never lay composite boards directly onto the ground or flat concrete — they need airflow underneath to prevent moisture buildup.

Joist Spacing

For standard deck boards:

• 300–350mm centre spacing
  

For step boards or areas with higher load:

• 250mm centre spacing
  

For diagonal patterns:

• 250mm is recommended due to increased board span.

Squaring & Levelling the Frame

A square frame ensures neat board lines and no creeping gaps.

The 3-4-5 Rule (Beginner Friendly)

1. Measure 3m on one joist.
2. Measure 4m along another.
3. The diagonal between those points should be 5m.

If it is, your corners are square.

Common Mistakes

❌ Joists not level:
Leads to bouncy boards, pooling water, and gaps appearing over time.

❌ Insufficient support:
Composite decking is heavier than timber; under-supported decks sag.

3. PLAN YOUR BOARD LAYOUT

Expansion Gaps Are Essential

Composite boards must have spacing:

• 3–6mm gap between board ends
• 3–8mm gap along sides
• 8–10mm perimeter gap against walls or fences
  

Why?

Boards expand in hot weather and contract in cold weather.
Without these gaps, boards can lift, buckle, or creak.

Direction of Boards

Choose one of the two reversible surfaces:

• Woodgrain side → natural look
• Grooved side → grippier & more modern
  

Important:
If the deck is in a direction where water needs to drain, install grooves running downhill.

4. INSTALLING THE FIRST BOARD (MOST IMPORTANT STEP)

The first board determines the straightness of the entire deck.

Step-by-Step

1. Install Starter Clips (if using clip system)

• Fix along the first joist.
• Ensure they form a perfectly straight line using a chalk string.
  

2. Position the First Board

• Slide it into the starter clips.
• Leave expansion gap at both ends.
  
  

3. Fix with Fasteners

You can install using:

Hidden Fasteners

• Place clip in board groove
• Screw into joist
• Insert next board into clip
• Repeat
  

Do not overtighten — clips must allow movement.

Direct Screw Fixing

If you prefer screws:

• Pre-drill through the groove lip (NOT the top surface)
• Use stainless-steel screws
• Keep screws straight and evenly spaced
  

Top-screwing is possible but not recommended unless necessary — it’s less attractive.

5. CONTINUING THE DECKING

Keep Spacing Consistent

Use spacers between all boards.

Stagger End Joints

Think of brickwork — stagger joints for strength and appearance.

Keep Checking Alignment

A string line or chalk line every few boards is essential to avoid drift.

6. CUTTING BOARDS

Composite boards cut similarly to timber but require clean, accurate cuts.

Tips:

• Use a fine-tooth wood or composite blade
• Cut slowly for clean edges
• Support both ends of the board
• Sand lightly if fuzzing occurs
  

Avoid:

❌ Cutting too fast (causes melting)
❌ Leaving rough edges unwiped (sharp plastic fibres)

7. INSTALLING EDGING TRIM (FASCIA)

Edging trim hides joists and cut ends — giving the deck a premium finish.

Installation Steps

1. Measure and cut trim to required length.
2. Pre-drill fixing holes every 300–400mm.
3. Screw directly into joists (use stainless-steel screws).
4. Maintain expansion gap where two trims meet.
5. Ensure top of trim aligns with top edge of boards.
   

Tips:

• Use colour-matched screws if visible.
• Install fascia last so you can hide small cut imperfections.
  
  

8. INSTALLING STEP BOARDS

Step boards (bullnose) create the front edge of steps.

Steps:

1. Reinforce step frame with joists at 250mm centres.
2. Install bullnose step board first (front).
3. Fix through groove lip or underside using screws.
4. Install decking board behind it for tread.
5. Add fascia or corner angle for side finishing.
   

Tips:

• Use anti-slip surface for steps if available.
• Check level and tread depth to avoid uneven steps.
  
  

Avoid:

❌ Using standard deck boards as step fronts (they lack nose overhang)
❌ Long unsupported overhangs (they can crack)

9. INSTALLING CORNER ANGLE TRIM

Corner angle trim protects exposed corners and gives clean detailing.

Steps:

1. Cut to length with mitre saw.
2. Pre-drill holes approx. every 300–400mm.
3. Fix using stainless-steel screws.
4. Ensure clean overlap over deck board edges.
5. Leave small expansion gap where two trims meet.

Tips:

• Mitre corners (45°) for premium appearance.
  
  

10. INSTALLING END CAPS (HOLLOW BOARDS)

End caps are very simple but extremely important.

Steps:

1. Ensure the board end is clean and square.
2. Align end cap to hollow chambers.
3. Push firmly until snug.
4. Tap lightly with rubber mallet if necessary.
   

Avoid:

❌ Using end caps on solid boards
❌ Forcing if resistance is high (clean the cavity first)

11. INSTALLING STEP END CAPS (STEP BOARDS)

Designed specifically for step boards.

Steps:

1. Identify left and right cap.
2. Insert into hollow step board end.
3. Push firmly until fully seated.
4. Tap gently with mallet if required.
   

Tips:

• Install after step boards are fixed for best fit.
  
  

12. CLEANING & MAINTENANCE

Do:

✔ Sweep regularly
✔ Wash with warm soapy water
✔ Use soft brush or mop
✔ Rinse thoroughly
✔ Clear drainage gaps

Don’t:

❌ Use bleach
❌ Use solvents
❌ Drag metal furniture across boards
❌ Place fire pits directly on boards

13. COMMON INSTALLATION MISTAKES (AND HOW TO AVOID THEM)

❌ No expansion gaps

Boards buckle in heat.
→ Always leave recommended gaps.

❌ Joists too far apart

Boards bounce or sag.
→ Keep spacing 250–350mm max.

❌ Overtightening fasteners

Boards creak or crack over time.
→ Fasteners must allow movement.

❌ Laying boards directly on the ground

Waterlogging and mould follow.
→ Always use a ventilated subframe.

❌ Cutting without support

Chips or splinters appear.
→ Support both ends when cutting.

YOUR DECK IS COMPLETE!

Do:

✔ Sweep regularly
✔ Wash with warm soapy water
✔ Use soft brush or mop
✔ Rinse thoroughly
✔ Clear drainage gaps

Don’t:

❌ Use bleach
❌ Use solvents
❌ Drag metal furniture across boards
❌ Place fire pits directly on boards

Home Delivery (England & Wales) available

or

Collection (South Wales) available from:

Address: Easy Panels, Robertstown Industrial Estate, Wellington Street, Aberdare, CF44 8HD.

Please note: For sat nav directions, please use the postcode CF44 8EZ.

Find us: Google Maps or What3Words.

Click here to view our Delivery Policy