10mm Platinum White Sparkle Gloss Shower Panel 1M x 2.4M

This panel measures 1000mm x 2400mm with a 10mm depth and is made from high-quality PVC. Its design combines a platinum-white gloss surface with sparkling silver highlights, adding a bold and contemporary edge to bathroom interiors. The hollow-core structure ensures strength and durability while remaining lightweight and easy to handle during fitting.

• Waterproof performance – Perfect for shower enclosures and bathroom walls, the panel creates a watertight surface that protects against moisture and damp.
  
• Seamless, grout-free installation – The tongue & groove system makes fitting straightforward and eliminates the risk of cracked or mouldy grout lines.
  
• Low-maintenance finish – The smooth gloss coating resists stains and dirt, allowing you to maintain a sparkling bathroom with minimal effort.
  
• Lightweight yet robust – Built with a 10mm hollow-core PVC structure that’s strong enough for everyday use but easy to install.
  
• Bold sparkle design – Platinum-white with glittering silver specks, this finish adds a sense of brightness and luxury to your walls.
  
• Tile alternative – Achieve a high-impact look that’s faster to fit, easier to clean, and more cost-effective than tiling.

The Platinum White Sparkle Gloss Shower Panel is ideal for those who want to make a statement in their bathroom, combining glamour with practicality in one striking panel.

Note: 10mm trims must be fitted when installing 10mm shower panels. 3 tubes of adhesive and sealant will be needed for each panel.

Getting your bathroom measurements right is essential for a smooth installation and a perfect finish. Whether you’re fitting full wall coverage, a shower enclosure, or a half-height splashback, knowing exactly how many panels to order will save time, reduce waste, and prevent costly delays.

Read our full guide here

To complete your project, you will need the following accessories and essentials:

- 10mm Trims

- Universal Trims

- PVA Wall Primer

- Adhesive and Sealant

Our panels feature a tongue and groove joint, which means they slot together perfectly to create a watertight finish. When it comes to fitting, these PVC panels can either be pinned to battens or stuck to the substrate using our High-Strength Cladding Adhesive.

When purchasing Cladding Adhesive, you will need to allow for 3 tubes per panel on freshly plastered walls

Note: Up to 4 tubes per panel on refurbished substrates, i.e. existing tiles and rough walls.

If you are purchasing panels with a tile effect, please take extra care to ensure the design aligns with the middle of the adjoining panel before trimming either end of the board.

For areas subject to a high-water or moisture content, we’d recommend running a very thin bead of sealant between the join to ensure a 100% watertight finish. Please take extra care to ensure that excess sealant doesn’t seep through onto the surface of the panel as this will damage the printed finish.

We do not recommend installing our PVC panels near direct sources of heat, i.e. hobs, cookers, and fireplaces.

Adhesives and Sealants

View our ‘How To’ guide

To keep your panels looking great, we recommend using a soft cloth or sponge (non-abrasive) and a mild detergent such as washing-up liquid, diluted in warm water. Dampen the cloth with the cleaning solution and wipe down from top to bottom. Rinse thoroughly before drying the panels with a microfibre cloth to avoid any streaks.

Note: Avoid using abrasive textiles or chemical cleaning products, as these will damage the protective coating and surface appearance of the panel.

To view a detailed guide on cleaning our PVC panels, click here.

Home Delivery (England & Wales) available

or

Collection (South Wales) available from:

Address: Easy Panels, Robertstown Industrial Estate, Wellington Street, Aberdare, CF44 8HD.

Please note: For sat nav directions, please use the postcode CF44 8EZ.

Find us: Google Maps or What3Words.

Click here to view our Delivery Policy

We offer up to three free samples per customer on all bathroom/shower panels and flooring products. If you would like to take advance of this service, please fill out our Request Form.

• Panel colours may vary between batches due to manufacturing and procurement processes.
• Please ensure you purchase enough panels for your project. We cannot guarantee to match batches between different orders. If you require an exact match, please keep a note of the batch numbers that appear on your packaging so we can check availability and try our best to assist you.
• All measurements provided are approximate.
• We do not recommend installing our PVC panels near direct sources of heat, i.e. hobs, cookers, and fireplaces.
• PVC panels are classified as building materials and by default are not supplied with edge-to-edge printing along the top and bottom of the panel. You will need to cut the panel to size, eliminating the corrugated edges at either end. This is not a manufacturing defect. An allowance of up to 20mm is required to accommodate this process.
• Please read the fitting instructions in their entirety before installing the product.
• Product images are for illustrative purposes only and may differ slightly from the actual product.
• PVC panels must not be exposed to UV light, both direct and indirect sunlight.
• Always store products flat, resting them on a surface that supports the entirety of product to prevent any bowing.
• Profiles and joint trims are sold separately.
• We strongly recommend that you do not book a fitter or tradesperson until you have received your delivery and are happy with your order. We cannot be held responsible for any third-party costs or charges incurred due to non-delivery of an order, or orders that have not been checked following delivery.
• All deliveries require someone present to sign for and take receipt of the goods. We will not leave goods in a ‘safe place’ without express prior consent.