American Oak AquaGuard Slat Wall Panel (Pack of 2) - New

Bring the natural warmth of timber into your home with our American Oak AquaGuard Panel. Featuring a beautifully detailed oak grain finish and a water-resistant core, this panel blends authentic style with everyday practicality.

Whether you're creating a standout feature wall in a living room, bedroom, hallway, or office, the AquaGuard panel delivers both visual impact and low-maintenance durability. Easy to clean and designed to withstand moisture, it’s the perfect solution for modern interiors that demand both function and flair.

Installation is simple and fuss-free, making it perfect for DIY or professional projects alike. Whether you’re updating a single wall or creating a full-room design, this panel adds a modern, elegant touch that lasts.

Key Features

• Moisture-Resistant – Built with from a composite base that’s ideal for bathrooms, kitchens, and other humid areas. No warping, no swelling – just long-lasting performance.
• Realistic Textured Finish – Combines the rich appearance of traditional wall panels with modern durability. Each panel looks and feels like the real thing.
• Quick & Easy Installation – Lightweight and designed with a half lap joint for fast, mess-free fitting. Perfect for DIYers and professionals alike.
• Low Maintenance – Simply wipe clean with a damp cloth. No grout, no mould, no stress.

Each panel is 305mm x 2600mm. A pack of two will cover a width of 610mm.

AquaGuard End Trims must be fitted when installing AquaGuard slat panels. 2 tubes of adhesive will be needed for each pack.

Please note: Our product images are for illustrative purposes only. Actual colours may vary slightly due to lighting, screen settings, and manufacturing processes. Samples are available to order for all products in the range - please click here to order.

These panels are splash-proof, not fully waterproof. Not recommended for use inside shower enclosures or areas with direct, continuous water contact.

Pre-installation Advice:

• Please inspect all items following your delivery to ensure they meet your expectations. Any damages, defects, or returns, must be reported with 14-days of delivery.
• Prior to installation, all panels must be stored flat, resting on a surface that supports the entirety of the panel to prevent any bowing. Do not store externally; the area must be dry with low humidity levels.
• This product is not intended for outdoor installations.
• The panels are manufactured from composites and some variation between the colour and texture is to be expected.
  

Installation Advice:

AquaGuard panels are suitable for horizontal or vertical alignment and have been designed with easy installation in mind.

You can mount the panels to most interior surfaces including brick, concrete, plasterboard, and battens - providing the substrate is sound, dry, and dust-free.

Simply secure the panels to the wall using adhesive, we recommend using Easy Panels High-Strength Cladding Adhesive. You will need 2 tubes per pack of 2.

Apply the adhesive liberally to the reverse of the panel in a vertical zig-zag formation before securing it in place. To prevent the adhesive exuding, maintain a distance of around 50mm from the panel edge. 

To begin installing your panels, align them from left to right along your wall, ensuring the half lap joint is on the right and the first slat is flush with the edge of the wall. The lip on the base has been designed to interlock seamlessly with the adjoining panel to disguise any joins and present a flawless finish.

When cutting the panels to size, we advise using a fine-toothed handsaw for higher precision in place of powered tools. A finer cut will help to eliminate any spurs and splintered edges. A sharp safety knife can be used to slice the backing vertically.

For heavy fixtures, such as TV mounts or shelving, please install these prior to fitting the panels and later cut the panel to accommodate such features. 

To finish any exposed edges on the panel, we recommend purchasing and installing our End Trim. These finishing trims are available in a range of colours to match your chosen panel, and they will hide the exposed edge of the black backing, giving the impression of a solid slat edge.

• Pencil
• Tape measure
• Spirit level
• A fine-toothed handsaw
• Safety knife
• Protective mask and safety glasses
• High-strength adhesive and caulking gun

To keep your panels looking great, we recommend using a soft cloth or sponge (non-abrasive) and a mild detergent such as washing-up liquid, diluted in warm water. Dampen the cloth with the cleaning solution and wipe down from top to bottom. Rinse thoroughly before drying the panels with a microfibre cloth to avoid any streaks.

Note: Avoid using abrasive textiles or chemical cleaning products, as these will damage the protective coating and surface appearance of the panel.

Home Delivery (England & Wales) available

or

Collection (South Wales) available from:

Address: Easy Panels, Robertstown Industrial Estate, Wellington Street, Aberdare, CF44 8HD.

Please note: For sat nav directions, please use the postcode CF44 8EZ.

Find us: Google Maps or What3Words.

Click here to view our Delivery Policy

When you order a sample from our AquaGuard Slat Panels, the shipping fee is included in the price of the sample. Orders for samples are dispatched the following working day and sent via Royal Mail 2nd Class service. Delivery is currently only available for mainland England & Wales.

Please note: If you place an order for a sample at the same time as purchasing other goods from our site, the delivery of your sample will be made at the same time as your order - within 2 to 6 working days.

To order samples, click here.

• Panel colours may vary between batches due to manufacturing and procurement processes.
• Please ensure you purchase enough panels for your project. We cannot guarantee to match batches between different orders. If you require an exact match, please keep a note of the batch numbers that appear on your packaging so we can check availability and try our best to assist you.
• All measurements provided are approximate.
• AquaGuard panels are classified as building materials and by default are not supplied with edge-to-edge printing along the top and bottom of the panel. You will need to cut the panel to size, eliminating the corrugated edges at either end. This is not a manufacturing defect. An allowance of up to 20mm is required to accommodate this process.
• Please read the fitting instructions in their entirety before installing the product.
• Product images are for illustrative purposes only and may differ slightly from the actual product.
• AquaGuard panels must not be exposed to UV light, both direct and indirect sunlight.
• Always store products flat, resting them on a surface that supports the entirety of the product to prevent any bowing.
• Profiles and joint trims are sold separately.
• We strongly recommend that you do not book a fitter or trades person until you have received your delivery and are happy with your order. We cannot be held responsible for any third-party costs or charges incurred due to non-delivery of an order, or orders that have not been checked following delivery.
• All deliveries require someone present to sign for and take receipt of the goods. We will not leave goods in a ‘safe place’ without express prior consent.